Tungsten carbide nozzle is made from hot pressing with straight bore and venturi bore type. Due to its hardness, low density and excellent wear and anti-corrosion, Tungsten carbide nozzle has been widely used in sandblasting and shot peening equipment, offering a long life with optimum air and abrasive use.
When choosing a tungsten carbide nozzle, consider the amount of available air in
cfm, the capacity of the blast machine and the inside diameter of the piping, and the blast and air hoses. For optimal performance, these elements must be compatibly sized. If too large a nozzle is used, low blast pressure and rapid wear on the blast hose will occur. If too small a nozzle is used, smooth media flow will be difficult to achieve.
Tungsten carbide nozzle offers long life and economy when rough handling cannot be avoided, and where medium cutting abrasives (glass bead, steel shot & grit, mineral or coal slag) are used. Traditionally, tungsten carbide is the material of choice for general nozzle applications. Tungsten carbide nozzle is also used in different applications like for wire straightening, wire guides and others.
没有评论:
发表评论