Tungsten Carbide Studs

Tungsten Carbide Studs Picture

We produce a series of tungsten carbide studs, due to the application of the double-action pressing machines and the well-prepared materials. Solid carbide studs (also called tire nails) are especially used in snowy areas to prevent cars from slipping. And due to our technique and efforts, our products have been stable and reliable.

tungsten carbide studsTungsten carbide studsare commonly inserted in snow tires in areas with a lot of snowy or icyweather. Carbide studs consist of two primary parts. The tungsten carbide pin is the element that protrudes beyond the tire tread and contacts the pavement surface. The outside part of the stud is a cylindrical metal jacket or body that is held in the tire tread rubber by a flange at the base. Tungsten Carbide Pins are intended for tractor, large working vehicle, loader and forklift.

Advantages of our tungsten carbide studs

1. We produce different sizes and different shapes of tungsten carbide pins, studs, nails for the tyre studs, spike, shoes, horses, buses, trucks, etc.

2. All of our materials for the tungsten carbide studs are made by our own Carbide Powder Plant, so you could get the products with excellent quality & favorable price.

tungsten carbide studs

3. Fully automatic manufacturing with famous Switzerland facilities under tough process control.

Our quality control of tungsten carbide studs:

1. All the raw materials are tested in terms of density, hardness and T.R.S before use.

2. Every product goes through in-process and final inspection.

3. We promise you the 100% raw material.

4. We quotation your order with 24 hours.

5. We accept your order as per your requirements.

Any feedback or inquiry of tungsten carbide products please feel free to contact us:

Email: sales@chinatungsten.com

Tel.: +86 592 512 9696 ; +86 592 512 9595

Fax.: +86 592 512 9797

Scan QR code of Chinatungsten Wechat platform to follow up the daily latest price and market of tungsten, molybdenum and rare earth.

Tungsten Carbide Thin Plate

Tungsten carbide thin plate is kind of carbide plate, the main feature of the thin plate is the thickness is only about 2~6mm. Carbide thin plate are widely used in forestry, rubber, textile industry and packaging materials industries. Or it also could as pallet used for high quality tungsten plate, tungsten electrode plates, hot rolling and cooling products. It could separate to round thin plate and square thin plate. Tungsten carbide thin plate are also used in electronics, lighting, vacuum coating, vacuum electronics, shield and furnaces industry.

Tungsten Carbide Thin Plate Picture

Tungsten Carbide Thin Plate Material Series

WC-Co carbide thin plate;

WC-TiC-Co carbide thin plate;

WC-TiC-Co carbide thin plate;

WC-TiC-TaC (NbC)-Co carbide thin plate;

WC-TiC-TaC (NbC)-Ti (C, N)-Co carbide thin plate;

TiC (N) carbide thin plate

The hardness of these material are all up than 90.0 HRA, and the T.R.S. could reach to 2800～4000MPa, with the features of wear resistance and corrosion rust, is the best material for tungsten carbide inserts and wear parts, are also available for the electronics industry anti-shield plate.

Any feedback or inquiry of tungsten carbide products please feel free to contact us:

Email: sales@chinatungsten.com

Tel.: +86 592 512 9696 ; +86 592 512 9595

Fax.: +86 592 512 9797

Scan QR code of Chinatungsten Wechat platform to follow up the daily latest price and market of tungsten, molybdenum and rare earth.

Tungsten Carbide Roller

Tungsten carbide roller has characteristics of good wear resistance, high temperature red hardness, thermal fatigue resistance and thermal conductivity and high strength , have been widely used in high-speed wire rod, bar, rebar, seamless steel tubes, etc. Domestic production of tungsten carbide roller materials mostly WC- Co, WC- Co- Ni- Cr two series, and the content of Co, Co- Ni - Cr is in the range of 6wt% ~ 30wt%. From the use of perspective, tungsten carbide rollers has good mechanical properties, its flexural strength up to 2200 MPa or more, shock toughness up (4 ~ 6) × 10^6 J/ m^2, Rockwell hardness (HRA) is up to 78 to 90, widely in the high-speed wire rod rolling process, which is much higher than single-slot chilled cast steel or high speed steel rolls.

Tungsten carbide is made of tungsten carbide powder and binder phase (such as drilling, nickel, etc.), and then pressing and sintering, regardless of the conditions under cold rolled or hot rolled has excellent wear resistance, tungsten carbide rollers has been widely used in pre-finishing mill and finishing of high-speed wire rod currently. On the performance of tungsten carbide roller in hot-rolling wire rod , the material must meet the following requirements:

Tungsten Carbide Roller Picture

1. Sufficient anti-fracture strength;

2. Good abrasion resistance;

3. The smooth surface finish;

4. Excellent corrosion resistance, thermal fatigue, thermal cracking performance.

Tungsten carbide roller rings can working in bad conditions , small profile rolling (especially rebar rolling) process conditions is harsher than the high-speed wire rod, and therefore corresponds to the profile rolling ,tungsten carbide rollers recommend using high binder phase carbide.

Tungsten Carbide Roller Material Design

Pre-finishing all vehicles roller should ensure its high toughness, strength, rigidity and thermal conductivity, followed before considering its wear resistance. When designing each vehicles roller, pre-finishing materials should choose carbide grades of Co, Co- Ni- Cr binder content is high (greater than or equal to 25wt%) , requiring an average WC grain size of coarse (5μm ~ 6μm), to obtain a higher shock toughness, proper strength and hardness. For the finishing of the roller movements, particularly the last two rollers of the finish rolling, which suffered load is small, and high relative velocity of the material to be pressed (80 m / min ~ 120 m / min). In this case, the wear resistance of the roller to be the most important requirements, and must ensure the strength , timpact toughness and hardness of a reasonable match, so the binder of Co / Ni content ratio and the average grain WC control of particle size and other factors must have greater control in front of different pre-finishing rolling roll.

Any feedback or inquiry of tungsten carbide products please feel free to contact us:

Email: sales@chinatungsten.com

Tel.: +86 592 512 9696 ; +86 592 512 9595

Fax.: +86 592 512 9797

Scan QR code of Chinatungsten Wechat platform to follow up the daily latest price and market of tungsten, molybdenum and rare earth.

Tungsten Carbide Punch

Tungsten Carbide Punch Picture

Tungsten carbide punch is mounted on metal parts stamping die, used in direct contact the material, and make the material ieformed, cutted. Tungsten carbide punch is a necessary accessorie to stamping die. Tungsten carbide punch depending on the punching material and thickness, to select a different alloy. Under normal circumstances, be thicker stamping products, tungsten carbide is better to choose the lower hardness and toughness of the model; the harder the material, select a slightly lower hardness models, which can effectively avoid the washed missing. When stamping relatively thin sheet metal , or hardness is not high, and hole machining of this product, tungsten steel punch can select higher hardness, thereby increasing the life of tungsten carbide punch. Tungsten carbide punch according to the different needs of the product, to produce different shapes, for example, a batch of drilling, the computer's chassis, there are a lot of top vents, as well as mobile phones, many of the electrical appliances, machinery the hole machining.

Tungsten Carbide Punch Applications

Due to the high punch size requirements, withstand greater impact loads and higher frequency of production, punch commonly is made by a high-speed steel or tungsten carbide material, tungsten carbide has high hardness, high hardness, high wear resistance, high red hardness, etc., generally used in demanding punching mold. Tungsten carbide punch are combined with the punch bar, punch nut, punch mother used together, generally used for punching tower plant uses. When stamping, large punch holes simultaneously processed hundreds takes less than one second, so greatly improves production efficiency. Therefore, tungsten carbide punch widely used in machinery manufacturing, automobile manufacturing, aerospace manufacturing and other fields.

Tungsten Carbide Punch Failure

Tungsten carbide punch is a key part to stamping die, improving tungsten carbide punch life can delay the failure of the mold. Its quality is not only related to the quality and performance of products, but also directly affect production costs and efficiency. Factors that affect the life of the punch are mainly design structure, selection of materials, machining, heat treatment, parts shapes and materials and so on. The daily work process tungsten carbide punch failure basic forms: plastic deformation, wear, fatigue, fracture. When punch working, the surface repeated contact with rough , plastic deformation and pitting of the cutting edge ,under the combined effect of the convex and concave mold adhesion gap, these phenomena with the alternating load and friction press, the temperature rise high and aggravated.

Any feedback or inquiry of tungsten carbide products please feel free to contact us:

Email: sales@chinatungsten.com

Tel.: +86 592 512 9696 ; +86 592 512 9595

Fax.: +86 592 512 9797

Scan QR code of Chinatungsten Wechat platform to follow up the daily latest price and market of tungsten, molybdenum and rare earth.