Tungsten Carbide Round Burr

Tungsten carbide round burr with a 6mm diameter and 6mm shank, these round nose cylinder shaped tungsten carbide burrs are to be used for easy removal of material, carving and defining. For use on many hard substances such as metals, stone, ceramic, porcelain, reinforced plastics and hard wood. Use with your rotary tool or die grinder.

Tungsten Carbide Round Burr

Tungsten carbide round burr is a shape D with a ball shaped tip. It is a HSS shank with a shank size of 1/8in. And a head size of 1/4in. Comes with a plastic storage box. Double cut is used on rapid stock removal in harder materials like iron, steel, copper, brass and other ferrous materials.

Tungsten carbide round burr suitable for deburring and polishing metal / nonmetal materials up to HRC70 hardness. Tungsten carbide burr is preferred for accurate metal removal when shaping, leveling, or porting cast iron, steel, and other nonmetal materials. This is a round tree shape carbide burr with 10mm head diameter. Tungsten carbide suitable for deburring and polishing metal / nonmetal materials up to HRC70 hardness.

If you have any inquires concerning tungsten carbide products, please do not hesitate to e-mail us by:sales@chinatungsten.com

Tungsten Carbide Dental Burs

Tungsten carbide dental burs can be used to cut or polish a wide variety of materials encountered in dentistry. These include tooth material such as enamel, dentine and bone, dental materials such as amalgam, composite, glass-ionomer cements, polymer and ceramic veneers and precious and not-precious alloys. The bur pattern will be selected to cut a specific material in a specific application and the following table gives guidance on selection.

Tungsten Carbide Dental Burs

Used burs should be considered as contaminated and appropriate handling precautions should be taken during reprocessing. Gloves, eye protection and a mask should be worn. Other measures may be required if there are specific infection or cross-contamination risks from the patient.
With the exception of steel burs, which are single use devices, reprocessing will have little effect on dental burs. The end of life is determined by wear and damage in use and the burs should be inspected for defects during the preliminary cleaning process.

Tungsten Carbide Dental Burs Used Safety Notes
Eye protection must be worn to protect against ejected particles.
Surgical mask must be worn to avoid inhalation of aerosol or dust generated.
Inspect the bur for broken flutes before each use and discard defective burs.

If you have any inquires concerning tungsten carbide products, please do not hesitate to e-mail us by:sales@chinatungsten.com

Tungsten Carbide Pins

Tungsten carbide pins are commonly inserted in snow tires in areas with a lot of snowy or icyweather. Tungsten carbide pins consist of two primary parts. The tungsten carbide pin is the element that protrudes beyond the tire tread and contacts the pavement surface. The outside part of the stud is a cylindrical metal jacket or body that is held in the tire tread rubber by a flange at the base. Tungsten carbide pins are intended for tractor, large working vehicle, loader and forklift.

tungsten carbide pins

Advantages of tungsten carbide pins
1. We produce different sizes and different shapes of tungsten carbide pins, studs, nails for the tyre studs, spike, shoes, horses, buses, trucks, etc.
2. All of our materials for the tungsten carbide pins are made by our own Carbide Powder Plant, so you could get the products with excellent quality & favorable price.
tungsten carbide pins
3. Fully automatic manufacturing with famous Switzerland facilities under tough process control.

We produce a series of tungsten carbide pins, due to the application of the double-action pressing machines and the well-prepared materials. Tungsten carbide pins (also called tire nails) are especially used in snowy areas to prevent cars from slipping. And due to our technique and efforts, our products have been stable and reliable.

If you have any inquires about any tungsten related products, please do not hesitate to e-mail us by: sales@chinatungsten.com

Tungsten Carbide Studs

Tungsten carbide studs are also called tungsten carbide pins, for they are widely applied to the snow studs area. Tungsten carbide studs are in the cylindrical shapes, and it shows the excellent performance in resisting wear and abrasion.

tungsten carbide studs

Tungsten carbide studs are usually made of tungsten carbide powder with the cobalt powder as the binder, and then sintered to the shape of small cylinders. They can be inserted into other covets or parts to work, and the most important application of tungsten carbide pins are in the tungsten carbide studs and shoes, which are quite popular among those countries with lots of snow to protect the cars or people from slipping.

Made from tungsten carbide material, tungsten carbide studs have extremely high hardness, and the most important is that they have great performance in resisting abrasion, so they have a long time service life when they are put into use.

If you have any inquires about any tungsten related products, please do not hesitate to e-mail us by: sales@chinatungsten.com

Tungsten Carbide Wear Plate

Tungsten carbide wear plate and wear ring is a pair of close coordination with the relatively moving part, the surface of these two parts coated with wear material, through the end of the spline nut opposite sex in S-shaped tube, concrete pump could adjust their gap between (0.1~0.2)mm. The rubber spring assembly in the middle of S-shaped tube and wear ring, the wear ring and wear plate will be flexible and comfortable on relative movement.

Wear Rate and Principle
With the use of time, the rubber spring will missing elasticity, wear ring and tungsten carbide wear plate will be wearied, the gap between these two part will be increased accordingly. As soon as the gap bigger than 0.7mm, it must be adjusted, otherwise the concrete pump mortar will into the room at once. If the mortar into the room, the wear rate will be increased rapidly.

When the pumps working, the wear ring will swing according to the S-shaped tub' swing, which plays a role in cutting concrete, so the wear rate of wear ring will be increased soon, the higher pressure in exit, the wear rate will be more serious. As usual, the wear part of wear ring is in the edge, which is in the upper 90 ° angle of two symmetrical parts. So if the wear ring is wearied in the up part, it should be turned on another angle, and then continue to use, this is a kind of method for extending service life.

If you have any inquires about any tungsten related products, please do not hesitate to e-mail us by: sales@chinatungsten.com

YT14 Tungsten Carbide Plate

YT14 tungsten carbide plate is a kind of alloy material composed of refractory metal compound and bonding of hard metal by powder metallurgy process. Cemented carbide has high hardness, wear resistance, strength and toughness, heat resistance, corrosion resistance and a series of excellent performance, especially its high hardness and wear resistance, even at a temperature of 500 ℃ the high hardnes also remained unchanged at 1000 ℃. The ISO grade of YT14 is P20, YT14 tungsten carbide bar with high hardness, T.R.S. and shock resistance, also with high wear resistance, is suitable for armored tank.

Properties and Applications
In order to reduce the harm to environment of the material used in the military field, and the tungsten carbide material with non-toxic, which are widely used for the production of tanks and armored sheet. Its main purpose is to produce high-performance, high specific gravity, non-toxic weapons and controllable power behavior. Since carbide high hardness and high temperature, it has been increasingly used in the military field.

If you have any inquires about any tungsten related products, please do not hesitate to e-mail us by: sales@chinatungsten.com

Tungsten Carbide Button

Tungsten carbide buttons are widely applied in geological prospecting, coal mining and oil well boring. Because of its wear resistance and hardness (9.8 Moe's scale), tungsten carbide is ideally suited for wear parts, other machine parts and dies which are subject to severe service conditions, such as high temperatures, corrosion and abrasion. In recent years, tungsten carbide has emerged as a superior alternative to steel in many industrial applications.
Most of this tungsten carbide wear parts and the mining tools are made of straight WC-Co hard metals without any addition of other carbides. Fine and ultrafine grained WC hard metals have become more and more important today in the field of wear parts, tools for chipless forming and cutting tools for cast iron, non ferrous alloys and wood.
A large portion of the tungsten volume in cemented carbide is today used in wear part applications, where there is a wide range of products from the very small (such as balls for ball-point pens) to large and heavy products, such as punches, dies or hot rolls for rolling mills in the steel industry.

Properties
1、Excellent Hardness: 86~93 HRA, which equal to 68~81HRC;
2、Excellent Hot Working Performance: Hardness could be remained at 60 HRC under 900~1000 ℃;
3、Resistance Wear: Some grades can outwear hardened steel by over 100 times
4、Resistance Corrosion: Grades with Nickel and Chromium binders are very resistant to acidic solutions
5、Impact Resistance: Tungsten cemented carbides are surprisingly tough considering their high hardness.

If you have any inquires about any tungsten related products, please do not hesitate to e-mail us by:sales@chinatungsten.com

Tungsten Carbide Ball for Universal Joint

Tungsten carbide ball are also called tungsten steel ball and cemented carbide ball, which is made of tungsten carbide material, include properties of high hardness, high T.R.S., high corrosion and bending, are able to instead of kinds of steel balls.

Universal joints have movement only in the vertical plane when they are used for lon¬gitudinally mounted propeller shafts and transverse rear mounted drive shafts. When these joints have been used for front outer drive shaft they have to move in both the vertical and horizontal plane to accommodate both vertical suspension deflection and the swivel pin angular movement to steer the front road wheels.

Tungsten carbide ball for universal joint with the properties of high hardenss, wear resistance, anti-corrosion, anti-bending and long lifespan. Which is widely used in fork-ball constant velocity joint and ball basket constant velocity joint.

If you have any inquires about any tungsten related products, please do not hesitate to e-mail us by:sales@chinatungsten.com